DM800/700 ECDIS

Load More
DM800/700 ECDIS

DM800 ECDIS

The Danelec Marine DM800 ECDIS is the larger member of the Danelec Marine ECDIS family. Equipped with 12 serial channels and 4 Ethernet ports, it offers the capacity for fully redundant operation in an ECDIS cluster with two or more ECDIS units, as well as in systems with a high number of sensor inputs. In order to secure system stability, the DM800 ECDIS controls network and serial data traffic by means of a dedicated front-end computer. This ensures uninterrupted communication even during restart of the DM800 unit.

 

DM800 ECDIS Main Unit

  • Linux based ECDIS computer with 32 GB SSD
  • 12 serial channels (10 x IEC 61162-1, 2 x IEC 61162-2)
  • 4 Ethernet ports (100BASE-TX, RJ45)
  • 8 USB ports (USB 2.0)
  • AC power (110-230V, 50-60Hz)
  • Supplied with ECDIS Alarm Panel and USB Hardware Key
  • Type approved for use without Uninterruptible Power Supply (UPS)

The DM800 ECDIS is fully interoperable with the DM700 ECDIS unit as well as with other DM800 ECDIS units, in clusters with up to four ECDIS units.

 

DM700 ECDIS

Smaller than its DM800 ECDIS counterpart and equipped with 5 serial channels and 2 Ethernet ports, the Danelec Marine DM700 ECDIS offers a compact solution as a backup ECDIS or for use in systems where the number of sensor inputs is limited. At the same time, it delivers the solidity, safety and simplicity of the ECDIS graphical user interface available in the DM800 ECDIS. The DM700 ECDIS operates on 12 VDC power and can be powered by an ECDIS monitor or a separate power supply.

For larger clusters where more network interfaces than offered by the DM700 ECDIS are needed, both the DM700 ECDIS and the DM800 ECDIS can be connected in a network using the Danelec Marine Managed Ethernet Switch MES 05-001.

DM700 ECDIS Main Unit

  • Linux based ECDIS computer with 64 GB SSD
  • 5 serial channels (5 x IEC 61162-2)
  • 2 Ethernet ports (1000BASE-T, RJ45)
  • Powered from monitor
  • Supplied with USB Hardware Key
  • 4 USB ports (1 x USB 3.0, 2 x USB 2.0, 1 x internal USB 2.0 for USB Hardware Key)
  • Type approved for use without Uninterruptible Power Supply (UPS)

Want to learn more about our solutions?